What equipment is needed to raise rabbits?

- Aug 21, 2018-


1, rabbit feeding trough

Rabbit breeding is recommended to use an external sealing type automatic feeding trough. This feeding trough is hung on the cage door. When the rabbit feeds, the head extends from the cage mouth into the trough, which can effectively prevent contamination of the feed and feed, and prevent the baby from being contaminated. The rabbit was drilled out of the mouth. The feeding trough consists of a feeding port, a storage bin, a feeding trough and a partition. The feeding outside the cage is very convenient and easy to operate.

2, rabbit cage classification

(1) Rabbit cage: The rabbit cage is larger in size, the cage length should be 70-80 cm, the cage width is 70-75 cm, the cage height is 45-50 cm, and the rear height is 35-40 cm. The distance between the bottom plate of the cage and the dung board is 10 to 13 cm in front and 18 to 23 cm in the back. It is best to use cement board or brickwork. If it is made of iron wire, the gap should not be more than 2 cm. It should be determined that the rabbit can not be drilled.

(2) Young rabbit cage: Young rabbits were vaccinated after weaning and placed in a young rabbit cage. The young rabbit cages are generally arranged horizontally in a row of wire cages, each cage being 30 cm long with a space between the cages. The cage is 40 cm wide, the front height is 35 cm, and the rear height is 25 cm. A row of sealed troughs is placed in front of the cage, and the young rabbits can feed their heads into the hole at any time. It is very convenient to open the cage door. There is a common grass frame at the interval between the two cages, and two duckbill automatic drinking fountains are installed in each cage. It is advisable to put 3 to 4 young rabbits per cage.

(3) Fattening cage: After the young rabbit grows to 1.5 kg, it must be transferred to the fattening cage in time.

3, rabbit drinking fountain

The rabbit water dispenser recommends using a pure water bottle to hang the water supply system connected to the duckbill drinker. The pure water bottle on the household water dispenser is hung upside down on the rabbit cage. The plastic bottle is connected to the water dispenser at the mouth of the bottle. Behind each rabbit cage.

4, rabbit calf box

The farrowing box is the main facility for artificially simulating the cave environment for the female rabbit to breed and raise. The warmth, ventilation, size and shape of the production box, the position of the bedding in the production box and the placement position of the production box all have great influence on the survival rate and development of the rabbit. It is recommended that everyone use sealed or cave production. box.

5, rabbit grass frame

The grass frame is the main food utensil for rabbits to feed green fodder or roughage. If it is a wire cage, it is recommended that the grass be placed in the middle and upper part of the middle of the two cages. If it is a fixed plate type rabbit cage, the grass can be placed on the outer side of the cage door, in order to Prevent forage from sprinkling through the outer gap of the straw frame, the outer wire of the straw frame can be encrypted, or made of iron plate or wood board.

6, feces and urine separate sewage system

Separate sewerage system is a very important link. The benefit of fecal and urine separation is that it can greatly reduce the concentration of ammonia in rabbits, reduce the stimulation of rabbit mucosa and control the occurrence of infectious rhinitis and respiratory inflammation.